The Avaya IP500 Analog Trunk 4 Module V2 provides an additional 4 Plain Ordinary Telephone Service (POTS) analog trunks for your Avaya IP Office system. This module must be fitted to an IP500 base card (see compatibility list below).

Features

• Provides 4 Loop-start analog trunk ports
• DTMF, ICLID, and busy tone detection
• DTMF and LD (loop disconnect) dialing
• Echo cancellation manually selectable to either On or Off. The default is On. The IP500 Analog Trunk Card V2 also supports echo reduction which is set to On by default.
• Automatic detection of line status for idle lines is supported. The card LEDs and System Status Application indicate that the individual line is connected and idle or is in use.
• Supports automatic impedance matching at system startup and this mode is enabled by default. Manual or no impedance matching can be used if required. Impedance matching is supported in all locales
• Voice Activity Detection - When enabled, allows the support on analog trunks of functions that require call progress indication, for example the use of mobile twinning. The function is not enabled by default. (Requires Avaya IP Office Release 9.1 and higher)
• Power Failure Port - Regardless of the IP500 card hosting it, during power failure pins 4 and 5 of port 12 are connected to pins 7 and 8. In addition, when fitted to an IP500 Analog Phone 8 base card, during power failure extension port 8 is connected to the analog trunk port 12.

System Compatibility

• Avaya IP Office Release 8.1 and higher (Feature Pack 1+)
• Maximum 4 per Control Unit
• No license required

Base Card Compatibility

The Avaya IP500 Analog Trunk 4 Module V2 must be fitted to one of the following IP500 Base Card’s:

• Avaya IP500 Digital Station 8
• Avaya IP500 Phone 2
• Avaya IP500 Phone 8
• Avaya IP500 ETR6
• Avaya IP500 TCM8
• Avaya IP500 VCM32 V1/V2
• Avaya IP500 VCM 64 V1/V2